W9IPA-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W9IPA-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784691929	12.6 Volt	260 Pkt	30 Pkt	49 Pcnt
1784690729	12.6 Volt	270 Pkt	30 Pkt	52 Pcnt
1784689529	12.6 Volt	290 Pkt	30 Pkt	60 Pcnt
1784688329	12.6 Volt	320 Pkt	40 Pkt	66 Pcnt
1784687129	12.6 Volt	330 Pkt	40 Pkt	72 Pcnt
1784685929	12.68 Volt	310 Pkt	40 Pkt	72 Pcnt
1784684729	12.68 Volt	310 Pkt	40 Pkt	74 Pcnt
1784683529	12.68 Volt	320 Pkt	50 Pkt	76 Pcnt
1784681129	12.75 Volt	330 Pkt	70 Pkt	79 Pcnt
1784679929	12.75 Volt	300 Pkt	60 Pkt	80 Pcnt
1784678729	12.75 Volt	290 Pkt	70 Pkt	78 Pcnt
1784677529	12.68 Volt	310 Pkt	70 Pkt	76 Pcnt
1784676329	12.75 Volt	320 Pkt	70 Pkt	75 Pcnt
1784675129	12.75 Volt	330 Pkt	60 Pkt	77 Pcnt
1784673929	12.83 Volt	300 Pkt	60 Pkt	80 Pcnt
1784672729	12.75 Volt	300 Pkt	60 Pkt	80 Pcnt
1784671529	12.75 Volt	300 Pkt	80 Pkt	77 Pcnt
1784670330	12.75 Volt	320 Pkt	80 Pkt	75 Pcnt
1784669130	12.75 Volt	320 Pkt	80 Pkt	76 Pcnt
1784667930	12.75 Volt	320 Pkt	70 Pkt	77 Pcnt
1784666730	12.75 Volt	330 Pkt	70 Pkt	78 Pcnt
1784665530	12.75 Volt	320 Pkt	70 Pkt	77 Pcnt
1784664330	12.83 Volt	310 Pkt	70 Pkt	75 Pcnt
1784663130	12.75 Volt	310 Pkt	70 Pkt	75 Pcnt
1784661930	12.75 Volt	320 Pkt	70 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)