N6BA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N6BA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx_10min*	%Drop_10min*	%Direct_10min*	RxAltFreq_10min*
1778784435	99 Pkts	45.45 %	14.14 %	0 Pkts
1778783835	92 Pkts	43.48 %	11.96 %	1 Pkts
1778783235	102 Pkts	40.2 %	13.73 %	1 Pkts
1778782635	84 Pkts	36.9 %	19.05 %	0 Pkts
1778782035	78 Pkts	44.87 %	15.38 %	0 Pkts
1778781435	87 Pkts	41.38 %	12.64 %	0 Pkts
1778780835	113 Pkts	45.13 %	15.93 %	0 Pkts
1778780235	103 Pkts	43.69 %	17.48 %	1 Pkts
1778779635	90 Pkts	40 %	18.89 %	1 Pkts
1778779035	122 Pkts	42.62 %	13.93 %	0 Pkts
1778778435	131 Pkts	49.62 %	12.21 %	0 Pkts
1778777835	106 Pkts	49.06 %	15.09 %	0 Pkts
1778777235	135 Pkts	44.44 %	15.56 %	0 Pkts
1778776635	103 Pkts	50.49 %	14.56 %	0 Pkts
1778776035	123 Pkts	53.66 %	14.63 %	0 Pkts
1778775435	160 Pkts	55 %	13.13 %	0 Pkts
1778774835	151 Pkts	56.29 %	13.91 %	0 Pkts
1778774235	136 Pkts	53.68 %	11.76 %	0 Pkts
1778773635	129 Pkts	45.74 %	11.63 %	1 Pkts
1778773035	122 Pkts	50 %	16.39 %	0 Pkts
1778772489	112 Pkts	48.21 %	7.14 %	0 Pkts
1778771835	146 Pkts	53.42 %	10.27 %	0 Pkts
1778771235	143 Pkts	48.25 %	8.39 %	1 Pkts
1778770635	119 Pkts	48.21 %	12.49 %	0 Pkts
1778770035	126 Pkts	49.21 %	13.49 %	0 Pkts

*Used Equation Coefficients:

Rx_10min: 0, 1, 0

RxSat_10min: 0, 1, 0

%Drop_10min: 0, 1, 0.454545

%Direct_10min: 0, 1, 0.141414

RxAltFreq_10min: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)