VK3RAW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RAW-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1765592898	28 Deg.C	12.1 Volts	34 PTT's	1	7
1765591099	28 Deg.C	12 Volts	41 PTT's	0	37
1765587499	28 Deg.C	12.1 Volts	46 PTT's	23	37
1765582097	27 Deg.C	12.1 Volts	62 PTT's	22	7
1765580296	26.5 Deg.C	12.1 Volts	47 PTT's	21	37
1765578497	25 Deg.C	12.1 Volts	65 PTT's	21	7
1765576697	24.5 Deg.C	12.1 Volts	46 PTT's	20	37
1765573097	23 Deg.C	12.1 Volts	27 PTT's	19	37
1765571297	22.5 Deg.C	12.1 Volts	29 PTT's	19	7
1765565898	22.5 Deg.C	12.1 Volts	28 PTT's	17	37
1765564100	22.5 Deg.C	12.1 Volts	24 PTT's	17	7
1765560498	23 Deg.C	12.3 Volts	25 PTT's	16	7
1765551496	24.5 Deg.C	12.1 Volts	31 PTT's	13	37
1765547898	25.5 Deg.C	12.1 Volts	34 PTT's	12	37
1765546096	26 Deg.C	12.1 Volts	34 PTT's	12	7
1765544298	26.5 Deg.C	12.1 Volts	33 PTT's	11	37
1765538898	28 Deg.C	12.1 Volts	27 PTT's	10	7
1765537101	28.5 Deg.C	12.2 Volts	29 PTT's	9	37
1765533496	29 Deg.C	12.2 Volts	24 PTT's	8	37
1765531695	29 Deg.C	12.1 Volts	21 PTT's	8	7
1765529895	28.5 Deg.C	12 Volts	30 PTT's	7	37
1765528095	29 Deg.C	12.1 Volts	28 PTT's	7	7
1765526296	29 Deg.C	12.2 Volts	18 PTT's	6	37
1765524495	29.5 Deg.C	12.2 Volts	15 PTT's	6	7
1765522695	29.5 Deg.C	12.2 Volts	15 PTT's	5	37

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)