XE3ISS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE3ISS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1787609494	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787606794	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787604095	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787601395	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787598695	14.78 Volt	0 Pkt	0 Pkt	66 Pcnt
1787595995	14.78 Volt	10 Pkt	10 Pkt	92 Pcnt
1787593295	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787590595	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787587895	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787585195	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787582496	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787579796	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787577096	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787574396	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787571696	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787568996	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787566420	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787563596	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787560897	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787558197	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787555497	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787550097	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787547397	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787544697	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt
1787541997	14.78 Volt	0 Pkt	0 Pkt	100 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)