DM2HEY-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2HEY-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1757595620	13.51 Volt	20 Pkt	10 Pkt	17 Pcnt
1757594720	13.51 Volt	20 Pkt	10 Pkt	19 Pcnt
1757593820	13.51 Volt	10 Pkt	10 Pkt	23 Pcnt
1757592920	13.51 Volt	20 Pkt	10 Pkt	31 Pcnt
1757592020	13.51 Volt	20 Pkt	10 Pkt	35 Pcnt
1757591120	13.51 Volt	20 Pkt	10 Pkt	28 Pcnt
1757590220	13.51 Volt	20 Pkt	0 Pkt	25 Pcnt
1757589320	13.51 Volt	10 Pkt	0 Pkt	22 Pcnt
1757588420	13.51 Volt	10 Pkt	10 Pkt	20 Pcnt
1757587520	13.51 Volt	10 Pkt	10 Pkt	21 Pcnt
1757586620	13.51 Volt	10 Pkt	10 Pkt	18 Pcnt
1757585720	13.51 Volt	10 Pkt	0 Pkt	12 Pcnt
1757584820	13.51 Volt	0 Pkt	0 Pkt	7 Pcnt
1757583920	13.51 Volt	10 Pkt	0 Pkt	10 Pcnt
1757583020	13.51 Volt	10 Pkt	0 Pkt	14 Pcnt
1757582120	13.51 Volt	20 Pkt	10 Pkt	21 Pcnt
1757581220	13.51 Volt	30 Pkt	10 Pkt	28 Pcnt
1757580320	13.51 Volt	30 Pkt	10 Pkt	35 Pcnt
1757579420	13.51 Volt	30 Pkt	10 Pkt	41 Pcnt
1757578520	13.51 Volt	30 Pkt	10 Pkt	37 Pcnt
1757577620	13.51 Volt	40 Pkt	10 Pkt	37 Pcnt
1757576720	13.51 Volt	40 Pkt	20 Pkt	37 Pcnt
1757575820	13.51 Volt	40 Pkt	20 Pkt	40 Pcnt
1757574930	13.51 Volt	50 Pkt	30 Pkt	44 Pcnt
1757574021	13.51 Volt	50 Pkt	30 Pkt	49 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)