ON4MAX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON4MAX-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772918820	14.1 Volt	570 Pkt	200 Pkt	73 Pcnt
1772918520	14.1 Volt	570 Pkt	200 Pkt	73 Pcnt
1772918220	14.1 Volt	570 Pkt	200 Pkt	73 Pcnt
1772917921	14.1 Volt	570 Pkt	200 Pkt	73 Pcnt
1772917920	14.1 Volt	570 Pkt	200 Pkt	73 Pcnt
1772917621	14.1 Volt	580 Pkt	190 Pkt	72 Pcnt
1772917320	14.1 Volt	570 Pkt	190 Pkt	71 Pcnt
1772917020	14.1 Volt	550 Pkt	180 Pkt	70 Pcnt
1772916721	14.1 Volt	530 Pkt	170 Pkt	68 Pcnt
1772916420	14.1 Volt	520 Pkt	170 Pkt	68 Pcnt
1772916121	14.1 Volt	520 Pkt	180 Pkt	69 Pcnt
1772916120	14.1 Volt	520 Pkt	180 Pkt	69 Pcnt
1772915821	14.1 Volt	510 Pkt	170 Pkt	68 Pcnt
1772915521	14.1 Volt	510 Pkt	170 Pkt	69 Pcnt
1772915221	14.1 Volt	500 Pkt	180 Pkt	69 Pcnt
1772914920	14.1 Volt	500 Pkt	180 Pkt	69 Pcnt
1772914621	14.1 Volt	490 Pkt	170 Pkt	69 Pcnt
1772914321	14.1 Volt	480 Pkt	180 Pkt	68 Pcnt
1772914321	14.1 Volt	480 Pkt	180 Pkt	68 Pcnt
1772914021	14.1 Volt	460 Pkt	170 Pkt	68 Pcnt
1772913721	14.1 Volt	460 Pkt	170 Pkt	67 Pcnt
1772913421	14.1 Volt	470 Pkt	180 Pkt	68 Pcnt
1772913121	14.1 Volt	480 Pkt	180 Pkt	68 Pcnt
1772912821	14.1 Volt	480 Pkt	170 Pkt	69 Pcnt
1772912521	14.1 Volt	470 Pkt	170 Pkt	68 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)