WC4PEM-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1784670601	24.5 C	4.73 Volt	270 Pkt	900 Pkt	73 Pcnt
1784670301	25 C	4.73 Volt	270 Pkt	910 Pkt	73 Pcnt
1784670301	25 C	4.73 Volt	270 Pkt	910 Pkt	73 Pcnt
1784670001	22 C	4.73 Volt	270 Pkt	910 Pkt	74 Pcnt
1784669701	22.5 C	4.73 Volt	270 Pkt	900 Pkt	74 Pcnt
1784669701	22.5 C	4.73 Volt	270 Pkt	900 Pkt	74 Pcnt
1784669401	23 C	4.73 Volt	270 Pkt	900 Pkt	74 Pcnt
1784669101	24 C	4.73 Volt	260 Pkt	880 Pkt	73 Pcnt
1784669101	24 C	4.73 Volt	260 Pkt	880 Pkt	73 Pcnt
1784668801	25.5 C	4.73 Volt	260 Pkt	880 Pkt	73 Pcnt
1784668501	23 C	4.73 Volt	260 Pkt	880 Pkt	73 Pcnt
1784668501	23 C	4.73 Volt	260 Pkt	880 Pkt	73 Pcnt
1784668201	22 C	4.73 Volt	260 Pkt	870 Pkt	73 Pcnt
1784667901	23 C	4.73 Volt	260 Pkt	860 Pkt	73 Pcnt
1784667901	23 C	4.73 Volt	260 Pkt	860 Pkt	73 Pcnt
1784667601	23.5 C	4.73 Volt	260 Pkt	870 Pkt	73 Pcnt
1784667301	25 C	4.73 Volt	260 Pkt	870 Pkt	72 Pcnt
1784667301	25 C	4.73 Volt	260 Pkt	870 Pkt	72 Pcnt
1784667001	23.5 C	4.73 Volt	270 Pkt	890 Pkt	73 Pcnt
1784666701	22 C	4.73 Volt	270 Pkt	890 Pkt	72 Pcnt
1784666701	22 C	4.73 Volt	270 Pkt	890 Pkt	72 Pcnt
1784666401	22.5 C	4.73 Volt	270 Pkt	900 Pkt	72 Pcnt
1784666101	23 C	4.73 Volt	270 Pkt	900 Pkt	71 Pcnt
1784666101	23 C	4.73 Volt	270 Pkt	900 Pkt	71 Pcnt
1784665801	24 C	4.73 Volt	280 Pkt	910 Pkt	71 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)