9A7KXP-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	TX1h*	DgR*	Eff*	Temp*
1784672436	80 Pkt	20 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784671358	100 Pkt	20 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784670636	90 Pkt	20 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784669618	90 Pkt	10 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784668836	90 Pkt	20 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784667880	80 Pkt	20 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784667036	90 Pkt	20 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784666137	100 Pkt	20 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784665237	120 Pkt	30 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784664397	120 Pkt	30 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784663437	130 Pkt	40 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784662657	130 Pkt	40 Pkt	26.24 Pcnt	58 Pcnt	-64 'C
1784661637	130 Pkt	40 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784660917	150 Pkt	50 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784659837	170 Pkt	70 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784659179	180 Pkt	70 Pkt	26.23 Pcnt	58 Pcnt	-64 'C
1784658037	170 Pkt	80 Pkt	26.22 Pcnt	58 Pcnt	-64 'C
1784657438	160 Pkt	80 Pkt	26.22 Pcnt	58 Pcnt	-64 'C
1784656237	190 Pkt	70 Pkt	26.2 Pcnt	58 Pcnt	-64 'C
1784655698	230 Pkt	70 Pkt	26.19 Pcnt	58 Pcnt	-64 'C
1784654437	370 Pkt	100 Pkt	26.18 Pcnt	58 Pcnt	-64 'C
1784653959	400 Pkt	100 Pkt	26.18 Pcnt	58 Pcnt	-64 'C
1784652637	390 Pkt	100 Pkt	26.17 Pcnt	58 Pcnt	-64 'C
1784652218	360 Pkt	90 Pkt	26.17 Pcnt	58 Pcnt	-64 'C
1784650837	210 Pkt	70 Pkt	26.18 Pcnt	58 Pcnt	-64 'C

*Used Equation Coefficients:

Rx1h: 0, 10, 0

TX1h: 0, 10, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)