KQ6DI-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	DC*	CPU*	Temp*	alt*	dB*
1761612302	1268	40.8	74.6	-143	-49
1761611402	1268	40.8	74.6	-139	-50
1761610501	1270	40.8	74.6	-146	-50
1761608702	1274	40.2	74.5	-145	-46
1761607801	1278	40.8	74.4	-147	-48
1761606902	1320	40.8	74.4	-147	-48
1761606014	1320	40.8	74.3	-145	-48
1761605101	1318	40.8	74.2	-145	-49
1761604202	1318	40.8	74	-144	-50
1761603302	1318	40.8	73.7	-146	-48
1761602401	1318	40.2	73.6	-150	-50
1761601502	1317	40.8	73.5	-159	-51
1761600602	1316	40.8	73.4	-158	-51
1761599701	1314	40.2	73.2	-157	-51
1761598802	1314	40.2	73.1	-162	-50
1761597902	1313	40.2	72.8	-176	-49
1761597001	1313	39.7	72.7	-182	-49
1761596102	1311	39.7	72.5	-184	-49
1761595202	1311	39.7	72.3	-185	-49
1761594302	1311	39.7	71.9	-193	-48
1761593402	1308	39.7	71.7	-205	-48
1761592502	1313	38.6	71.3	-202	-44
1761591601	1307	39.2	71.2	-207	-45
1761589802	1306	38.6	70.9	-215	-45
1761588901	1315	38.6	70.8	-209	-45

*Used Equation Coefficients:

DC: 0, 1, 1000

CPU: 0, 0.1, 0

Temp: 0, 0.1, 0

alt: 0, 1, -1000

dB: 0, -1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)