TA5BLT-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5BLT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753730680	3 Pkt	0 Pkt	0 Pkt	-72 dBm	0.06 V
1753730552	100 Pkt	0 Pkt	0 Pkt	-71 dBm	0.06 V
1753726926	73 Pkt	0 Pkt	0 Pkt	-68 dBm	0.06 V
1753723300	15 Pkt	0 Pkt	0 Pkt	-68 dBm	0.06 V
1753713192	13 Pkt	0 Pkt	0 Pkt	-72 dBm	0.06 V
1753701927	11 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V
1753694682	45 Pkt	6 Pkt	0 Pkt	-74 dBm	0.06 V
1753691057	75 Pkt	8 Pkt	0 Pkt	-74 dBm	0.06 V
1753687430	47 Pkt	5 Pkt	0 Pkt	-75 dBm	0.06 V
1753683805	62 Pkt	7 Pkt	4 Pkt	-75 dBm	0.06 V
1753680179	35 Pkt	10 Pkt	2 Pkt	-75 dBm	0.06 V
1753676555	55 Pkt	8 Pkt	2 Pkt	-75 dBm	0.06 V
1753672928	23 Pkt	10 Pkt	1 Pkt	-74 dBm	0.06 V
1753669304	47 Pkt	13 Pkt	5 Pkt	-73 dBm	0.06 V
1753665679	33 Pkt	7 Pkt	0 Pkt	-75 dBm	0.06 V
1753662055	18 Pkt	2 Pkt	0 Pkt	-74 dBm	0.06 V
1753658432	11 Pkt	0 Pkt	0 Pkt	-74 dBm	0.06 V
1753654809	20 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V
1753651186	16 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V
1753647562	30 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V
1753643938	62 Pkt	0 Pkt	0 Pkt	-74 dBm	0.06 V
1753640310	25 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V
1753636687	30 Pkt	0 Pkt	0 Pkt	-73 dBm	0.06 V
1753633063	23 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V
1753629440	19 Pkt	0 Pkt	0 Pkt	-75 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)