VO2KG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2KG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BatteryLevel*	BatteryTemp*	AmbientTemp*	BoxTemp*	CPUTemp*
1761813036	12.53 V	3.6 C	4.1 C	13.13 C	35.4 C
1761812585	12.56 V	3.6 C	4.15 C	13.05 C	35.65 C
1761812136	12.51 V	3.6 C	4.15 C	13.05 C	35.65 C
1761811686	12.56 V	3.6 C	4.2 C	13.03 C	35.85 C
1761811236	12.51 V	3.6 C	4.15 C	13.05 C	35.58 C
1761810786	12.53 V	3.6 C	4.1 C	13 C	35.75 C
1761810337	12.53 V	3.6 C	4.13 C	13.03 C	35.93 C
1761809886	12.53 V	3.58 C	4.15 C	13 C	36.28 C
1761808984	12.56 V	3.55 C	4.15 C	12.95 C	35.83 C
1761807636	12.56 V	3.58 C	4.2 C	13.03 C	35.3 C
1761807186	12.56 V	3.55 C	4.2 C	12.98 C	35.58 C
1761806286	12.56 V	3.5 C	4.2 C	13.05 C	35.75 C
1761805384	12.56 V	3.5 C	4.2 C	13.05 C	35.93 C
1761804487	12.56 V	3.5 C	4.2 C	13.1 C	35.58 C
1761803587	12.56 V	3.5 C	4.2 C	13.15 C	35.58 C
1761803137	12.56 V	3.5 C	4.2 C	13.2 C	35.4 C
1761802686	12.56 V	3.5 C	4.2 C	13.18 C	35.4 C
1761801784	12.56 V	3.5 C	4.2 C	13.2 C	35.48 C
1761801336	12.56 V	3.5 C	4.2 C	13.25 C	35.65 C
1761800886	12.53 V	3.5 C	4.2 C	13.2 C	35.65 C
1761800437	12.56 V	3.5 C	4.2 C	13.2 C	35.65 C
1761799986	12.56 V	3.5 C	4.2 C	13.2 C	36.1 C
1761799086	12.56 V	3.5 C	4.2 C	13.4 C	36.03 C
1761798637	12.56 V	3.5 C	4.2 C	13.55 C	35.93 C
1761798184	12.56 V	3.47 C	4.15 C	13.28 C	35.85 C

*Used Equation Coefficients:

BatteryLevel: 0, 0.01, 0

BatteryTemp: 0, 0.025, -125

AmbientTemp: 0, 0.025, -125

BoxTemp: 0, 0.025, -125

CPUTemp: 0, 0.025, -125

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)