HS6KLJ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	AllCount*	AllDrop*
1765546294	4 Pkts	11 Pkts	0 Pkts
1765545694	4 Pkts	9 Pkts	0 Pkts
1765545094	6 Pkts	17 Pkts	0 Pkts
1765544494	4 Pkts	10 Pkts	2 Pkts
1765543299	1 Pkts	7 Pkts	0 Pkts
1765542693	5 Pkts	12 Pkts	0 Pkts
1765540293	3 Pkts	10 Pkts	0 Pkts
1765539693	0 Pkts	6 Pkts	0 Pkts
1765539093	0 Pkts	10 Pkts	0 Pkts
1765538493	5 Pkts	10 Pkts	0 Pkts
1765537893	2 Pkts	10 Pkts	0 Pkts
1765537295	46 Pkts	51 Pkts	0 Pkts
1765536693	47 Pkts	54 Pkts	0 Pkts
1765536093	27 Pkts	35 Pkts	4 Pkts
1765535493	1 Pkts	8 Pkts	0 Pkts
1765534893	2 Pkts	7 Pkts	0 Pkts
1765534293	1 Pkts	9 Pkts	0 Pkts
1765532493	6 Pkts	15 Pkts	0 Pkts
1765531893	1 Pkts	7 Pkts	2 Pkts
1765531293	4 Pkts	11 Pkts	0 Pkts
1765530693	1 Pkts	7 Pkts	0 Pkts
1765530093	7 Pkts	15 Pkts	2 Pkts
1765529493	5 Pkts	11 Pkts	0 Pkts
1765528893	5 Pkts	12 Pkts	2 Pkts
1765528293	3 Pkts	8 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)