VK7HSE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK7HSE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784720244	0.03 Rx Erlang	0.1 Tx Erlang	26 count/10m	14 count/10m	65 count/10m
1784719044	0.03 Rx Erlang	0.07 Tx Erlang	22 count/10m	14 count/10m	54 count/10m
1784717844	0.04 Rx Erlang	0.07 Tx Erlang	34 count/10m	19 count/10m	55 count/10m
1784716644	0.02 Rx Erlang	0.08 Tx Erlang	9 count/10m	7 count/10m	56 count/10m
1784715444	0 Rx Erlang	0.07 Tx Erlang	1 count/10m	0 count/10m	58 count/10m
1784714244	0.02 Rx Erlang	0.08 Tx Erlang	14 count/10m	7 count/10m	63 count/10m
1784713044	0.03 Rx Erlang	0.06 Tx Erlang	26 count/10m	7 count/10m	44 count/10m
1784711844	0.03 Rx Erlang	0.07 Tx Erlang	22 count/10m	11 count/10m	52 count/10m
1784710644	0.03 Rx Erlang	0.06 Tx Erlang	28 count/10m	12 count/10m	48 count/10m
1784709444	0.07 Rx Erlang	0.07 Tx Erlang	83 count/10m	18 count/10m	54 count/10m
1784708244	0.04 Rx Erlang	0.07 Tx Erlang	34 count/10m	14 count/10m	54 count/10m
1784707044	0.04 Rx Erlang	0.06 Tx Erlang	44 count/10m	14 count/10m	46 count/10m
1784705844	0.04 Rx Erlang	0.07 Tx Erlang	37 count/10m	21 count/10m	52 count/10m
1784704644	0.02 Rx Erlang	0.06 Tx Erlang	13 count/10m	5 count/10m	47 count/10m
1784703444	0.03 Rx Erlang	0.08 Tx Erlang	26 count/10m	9 count/10m	55 count/10m
1784702244	0.05 Rx Erlang	0.06 Tx Erlang	46 count/10m	13 count/10m	44 count/10m
1784701044	0.05 Rx Erlang	0.08 Tx Erlang	54 count/10m	13 count/10m	55 count/10m
1784699844	0.07 Rx Erlang	0.07 Tx Erlang	83 count/10m	23 count/10m	51 count/10m
1784698644	0.04 Rx Erlang	0.08 Tx Erlang	22 count/10m	13 count/10m	60 count/10m
1784697444	0.02 Rx Erlang	0.07 Tx Erlang	11 count/10m	1 count/10m	54 count/10m
1784696244	0.01 Rx Erlang	0.09 Tx Erlang	10 count/10m	1 count/10m	61 count/10m
1784695044	0 Rx Erlang	0.09 Tx Erlang	0 count/10m	0 count/10m	71 count/10m
1784693844	0.01 Rx Erlang	0.09 Tx Erlang	13 count/10m	0 count/10m	57 count/10m
1784692644	0.01 Rx Erlang	0.08 Tx Erlang	13 count/10m	0 count/10m	52 count/10m
1784691444	0.02 Rx Erlang	0.07 Tx Erlang	13 count/10m	3 count/10m	44 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)