IR1CX Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1CX. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Charge*	Volt_aux*	Temp_radio*	Temp_ext*
1765589210	12.8 Volt	-0.15 Amp.	7.5 Volt	4.25 GrdC	6.25 GrdC
1765588603	12.8 Volt	-0 Amp.	7.5 Volt	4.5 GrdC	6.25 GrdC
1765588003	12.8 Volt	-0 Amp.	7.5 Volt	4.5 GrdC	6.5 GrdC
1765587396	12.8 Volt	-0 Amp.	7.5 Volt	4.25 GrdC	6.5 GrdC
1765586796	12.8 Volt	-0 Amp.	7.5 Volt	4.25 GrdC	6.5 GrdC
1765586189	12.8 Volt	-0 Amp.	7.5 Volt	4.5 GrdC	6 GrdC
1765585589	12.8 Volt	-0 Amp.	7.5 Volt	4.75 GrdC	6.5 GrdC
1765584991	12.8 Volt	-0 Amp.	7.5 Volt	4.75 GrdC	6.75 GrdC
1765584382	12.8 Volt	-0 Amp.	7.5 Volt	4.5 GrdC	6.75 GrdC
1765583775	12.8 Volt	-0 Amp.	7.5 Volt	4.5 GrdC	6.5 GrdC
1765583174	12.8 Volt	-0 Amp.	7.5 Volt	4.75 GrdC	6.75 GrdC
1765581967	12.8 Volt	-0 Amp.	7.6 Volt	5.5 GrdC	7 GrdC
1765581360	12.8 Volt	-0.15 Amp.	7.6 Volt	5.5 GrdC	7 GrdC
1765580760	12.8 Volt	-0.15 Amp.	7.6 Volt	5.5 GrdC	7 GrdC
1765580153	12.8 Volt	-0.15 Amp.	7.6 Volt	5.5 GrdC	7 GrdC
1765579553	12.8 Volt	-0.15 Amp.	7.5 Volt	5.5 GrdC	7.25 GrdC
1765578946	12.8 Volt	-0 Amp.	7.6 Volt	5.5 GrdC	6.75 GrdC
1765578346	12.8 Volt	-0.15 Amp.	7.6 Volt	5.5 GrdC	6.75 GrdC
1765577739	12.9 Volt	-0 Amp.	7.6 Volt	5.75 GrdC	6.75 GrdC
1765577139	12.9 Volt	-0 Amp.	7.6 Volt	5.75 GrdC	7 GrdC
1765576532	12.9 Volt	-0 Amp.	7.6 Volt	5.75 GrdC	7 GrdC
1765575952	12.9 Volt	-0 Amp.	7.6 Volt	5.75 GrdC	7.25 GrdC
1765575325	12.9 Volt	-0.15 Amp.	7.6 Volt	5.5 GrdC	7.25 GrdC
1765574724	12.9 Volt	-0 Amp.	7.5 Volt	5.5 GrdC	7 GrdC
1765574117	12.9 Volt	-0 Amp.	7.5 Volt	5.25 GrdC	7 GrdC

*Used Equation Coefficients:

Battery: 0, 0.1, 0

Charge: 0, 0.1452, -18.59

Volt_aux: 0, 0.1, 0

Temp_radio: 0, 0.25, -20.5

Temp_ext: 0, 0.25, -20.5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)