W2WCR-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W2WCR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1757921370	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757921069	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757920769	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757920469	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757920169	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757919868	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757919568	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757919336	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757919268	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757918967	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757918684	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757918367	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757918066	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757917766	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757917466	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757917166	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757916865	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757916565	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757916265	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757915964	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757915664	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757915364	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757915064	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757914763	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1757914463	15.08 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)