AC2MI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AC2MI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789960874	27 Pkts	25 Pkts	11 Pkts	16 C
1789960274	45 Pkts	42 Pkts	5 Pkts	16 C
1789959674	43 Pkts	42 Pkts	7 Pkts	16 C
1789959074	39 Pkts	37 Pkts	6 Pkts	15 C
1789958474	45 Pkts	42 Pkts	5 Pkts	15 C
1789957874	38 Pkts	37 Pkts	9 Pkts	16 C
1789957274	55 Pkts	54 Pkts	10 Pkts	15 C
1789956702	51 Pkts	49 Pkts	1 Pkts	15 C
1789956074	71 Pkts	69 Pkts	6 Pkts	15 C
1789955474	54 Pkts	53 Pkts	12 Pkts	16 C
1789954874	34 Pkts	31 Pkts	11 Pkts	16 C
1789954274	40 Pkts	37 Pkts	7 Pkts	15 C
1789953674	51 Pkts	50 Pkts	9 Pkts	16 C
1789953074	67 Pkts	66 Pkts	8 Pkts	15 C
1789952474	37 Pkts	35 Pkts	6 Pkts	16 C
1789951874	29 Pkts	26 Pkts	5 Pkts	15 C
1789951274	30 Pkts	26 Pkts	5 Pkts	16 C
1789950674	34 Pkts	31 Pkts	10 Pkts	16 C
1789949374	21 Pkts	19 Pkts	8 Pkts	16 C
1789948774	19 Pkts	17 Pkts	7 Pkts	15 C
1789948174	25 Pkts	24 Pkts	6 Pkts	16 C
1789947573	18 Pkts	17 Pkts	7 Pkts	16 C
1789946973	19 Pkts	17 Pkts	8 Pkts	16 C
1789946373	10 Pkts	8 Pkts	5 Pkts	15 C
1789945773	15 Pkts	13 Pkts	3 Pkts	16 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

V2: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)