YM7KK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM7KK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788670896	13.2 Volt	380 Pkt	140 Pkt	73 Pcnt
1788670596	13.2 Volt	380 Pkt	140 Pkt	72 Pcnt
1788670596	13.2 Volt	380 Pkt	140 Pkt	72 Pcnt
1788670296	13.2 Volt	390 Pkt	140 Pkt	73 Pcnt
1788669996	13.2 Volt	390 Pkt	140 Pkt	72 Pcnt
1788669996	13.2 Volt	390 Pkt	140 Pkt	72 Pcnt
1788669696	13.2 Volt	390 Pkt	140 Pkt	72 Pcnt
1788669397	13.2 Volt	390 Pkt	140 Pkt	71 Pcnt
1788669396	13.2 Volt	390 Pkt	140 Pkt	71 Pcnt
1788669096	13.2 Volt	380 Pkt	140 Pkt	72 Pcnt
1788668797	13.2 Volt	370 Pkt	130 Pkt	73 Pcnt
1788668796	13.2 Volt	370 Pkt	130 Pkt	73 Pcnt
1788668496	13.2 Volt	330 Pkt	120 Pkt	72 Pcnt
1788668197	13.2 Volt	320 Pkt	120 Pkt	72 Pcnt
1788668196	13.2 Volt	320 Pkt	120 Pkt	72 Pcnt
1788667896	13.2 Volt	310 Pkt	110 Pkt	74 Pcnt
1788667596	13.2 Volt	300 Pkt	110 Pkt	76 Pcnt
1788667296	13.2 Volt	300 Pkt	100 Pkt	75 Pcnt
1788666996	13.2 Volt	300 Pkt	100 Pkt	74 Pcnt
1788666696	13.2 Volt	310 Pkt	100 Pkt	74 Pcnt
1788666397	13.2 Volt	300 Pkt	100 Pkt	75 Pcnt
1788666396	13.2 Volt	300 Pkt	100 Pkt	75 Pcnt
1788666096	13.2 Volt	310 Pkt	100 Pkt	74 Pcnt
1788665797	13.2 Volt	310 Pkt	100 Pkt	76 Pcnt
1788665796	13.2 Volt	310 Pkt	100 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)