VA3XLT-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1788575387	13.88 Volt	470 Pkt	64 Pcnt	63 Pkt
1788575087	13.88 Volt	460 Pkt	64 Pcnt	75 Pkt
1788574786	13.88 Volt	470 Pkt	64 Pcnt	72 Pkt
1788574487	13.88 Volt	460 Pkt	64 Pcnt	74 Pkt
1788574187	13.88 Volt	460 Pkt	64 Pcnt	72 Pkt
1788573887	13.88 Volt	450 Pkt	65 Pcnt	43 Pkt
1788573587	13.88 Volt	460 Pkt	66 Pcnt	74 Pkt
1788573287	13.88 Volt	470 Pkt	67 Pcnt	86 Pkt
1788572987	13.88 Volt	450 Pkt	67 Pcnt	65 Pkt
1788572687	13.88 Volt	450 Pkt	67 Pcnt	83 Pkt
1788572387	13.88 Volt	460 Pkt	66 Pcnt	79 Pkt
1788572087	13.88 Volt	450 Pkt	66 Pcnt	62 Pkt
1788571787	13.88 Volt	470 Pkt	66 Pcnt	77 Pkt
1788571487	13.88 Volt	470 Pkt	66 Pcnt	68 Pkt
1788571187	13.88 Volt	460 Pkt	66 Pcnt	54 Pkt
1788570887	13.88 Volt	470 Pkt	67 Pcnt	70 Pkt
1788570587	13.88 Volt	460 Pkt	66 Pcnt	70 Pkt
1788570287	13.88 Volt	470 Pkt	66 Pcnt	68 Pkt
1788569987	13.88 Volt	470 Pkt	66 Pcnt	68 Pkt
1788569687	13.88 Volt	460 Pkt	66 Pcnt	71 Pkt
1788569387	13.88 Volt	450 Pkt	65 Pcnt	76 Pkt
1788569087	13.88 Volt	460 Pkt	66 Pcnt	84 Pkt
1788568787	13.88 Volt	450 Pkt	68 Pcnt	85 Pkt
1788568487	13.88 Volt	430 Pkt	68 Pcnt	71 Pkt
1788568187	13.88 Volt	430 Pkt	69 Pcnt	66 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)