Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object VU2JHM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* WiFi* BaudRate*
1787654106 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787653506 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787652906 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787652306 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787651707 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787651106 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787650506 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787649906 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787649306 0 Pkt 0 Pkt 0 Pkt 47 dB 9600 bps
1787648706 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787648106 0 Pkt 0 Pkt 0 Pkt 47 dB 9600 bps
1787647506 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787646906 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787646306 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787645706 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787645106 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787644506 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787643906 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787643306 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787642706 0 Pkt 0 Pkt 0 Pkt 44 dB 9600 bps
1787642106 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787641506 0 Pkt 0 Pkt 0 Pkt 46 dB 9600 bps
1787640906 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
1787640306 0 Pkt 0 Pkt 0 Pkt 43 dB 9600 bps
1787639706 0 Pkt 0 Pkt 0 Pkt 45 dB 9600 bps
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 100
BaudRate: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)