PY2KGL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PY2KGL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX Avg 10m*	RX Count 10m*	TX Count 10m*	Uptime*
1787586587	0.33 erlang	2 receptions	30 transmissions	12 days
1787585987	0.04 erlang	0 receptions	3 transmissions	12 days
1787585387	0 erlang	0 receptions	2 transmissions	12 days
1787584787	0 erlang	0 receptions	0 transmissions	12 days
1787584187	0.04 erlang	0 receptions	4 transmissions	12 days
1787583587	0 erlang	0 receptions	0 transmissions	12 days
1787582987	0.02 erlang	0 receptions	5 transmissions	12 days
1787582387	0.1 erlang	0 receptions	13 transmissions	12 days
1787581787	0.32 erlang	0 receptions	19 transmissions	12 days
1787581187	0.01 erlang	0 receptions	2 transmissions	12 days
1787580587	0.03 erlang	0 receptions	2 transmissions	12 days
1787579987	0.01 erlang	0 receptions	2 transmissions	12 days
1787579387	0.01 erlang	0 receptions	4 transmissions	12 days
1787578807	0.05 erlang	0 receptions	9 transmissions	12 days
1787578187	0.02 erlang	1 receptions	4 transmissions	11 days
1787577587	0.03 erlang	0 receptions	7 transmissions	11 days
1787576987	0.14 erlang	0 receptions	21 transmissions	11 days
1787576387	0.01 erlang	0 receptions	1 transmissions	11 days
1787575787	0.01 erlang	1 receptions	4 transmissions	11 days
1787575187	0.05 erlang	3 receptions	6 transmissions	11 days
1787574587	0 erlang	0 receptions	1 transmissions	11 days
1787573987	0.02 erlang	0 receptions	8 transmissions	11 days
1787573387	0.04 erlang	0 receptions	3 transmissions	11 days
1787572787	0.01 erlang	0 receptions	2 transmissions	11 days
1787572187	0.01 erlang	0 receptions	3 transmissions	11 days

*Used Equation Coefficients:

RX Avg 10m: 0, 0.001, 0

TX Avg 10m: 0, 0.001, 0

RX Count 10m: 0, 1, 0

TX Count 10m: 0, 1, 0

Uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)