MB7UDY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object MB7UDY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765535167	0.01 Rx Erlang	0.02 Tx Erlang	10 count/10m	9 count/10m	11 count/10m
1765533967	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	8 count/10m	9 count/10m
1765532767	0 Rx Erlang	0.01 Tx Erlang	3 count/10m	2 count/10m	4 count/10m
1765531567	0.02 Rx Erlang	0.02 Tx Erlang	12 count/10m	11 count/10m	13 count/10m
1765530367	0.02 Rx Erlang	0.02 Tx Erlang	15 count/10m	15 count/10m	15 count/10m
1765529167	0.02 Rx Erlang	0.02 Tx Erlang	14 count/10m	14 count/10m	15 count/10m
1765527967	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	8 count/10m	10 count/10m
1765526767	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765525567	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	2 count/10m	3 count/10m
1765524367	0 Rx Erlang	0.01 Tx Erlang	3 count/10m	2 count/10m	4 count/10m
1765523167	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765521967	0 Rx Erlang	0 Tx Erlang	2 count/10m	2 count/10m	3 count/10m
1765520767	0 Rx Erlang	0 Tx Erlang	3 count/10m	2 count/10m	3 count/10m
1765519567	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765518367	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765517167	0 Rx Erlang	0.01 Tx Erlang	3 count/10m	2 count/10m	4 count/10m
1765515967	0 Rx Erlang	0 Tx Erlang	3 count/10m	3 count/10m	3 count/10m
1765514767	0 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765513567	0 Rx Erlang	0.01 Tx Erlang	3 count/10m	2 count/10m	4 count/10m
1765512367	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765511167	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	3 count/10m
1765509967	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	1 count/10m	3 count/10m
1765508767	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	3 count/10m	5 count/10m
1765507572	0.01 Rx Erlang	0.01 Tx Erlang	3 count/10m	3 count/10m	3 count/10m
1765506367	0 Rx Erlang	0.01 Tx Erlang	3 count/10m	2 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)