SA7ELD-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA7ELD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	DgR1h*
1784740756	12.53 Volt	70 Pkt	0 Pkt	42 Pcnt	0 Pcnt
1784740473	12.53 Volt	70 Pkt	0 Pkt	42 Pcnt	0 Pcnt
1784740156	12.53 Volt	70 Pkt	0 Pkt	41 Pcnt	0 Pcnt
1784739856	12.53 Volt	70 Pkt	0 Pkt	41 Pcnt	0 Pcnt
1784739556	12.53 Volt	70 Pkt	0 Pkt	41 Pcnt	0 Pcnt
1784739256	12.53 Volt	80 Pkt	0 Pkt	41 Pcnt	0 Pcnt
1784738956	12.53 Volt	90 Pkt	0 Pkt	43 Pcnt	1.1 Pcnt
1784738656	12.53 Volt	90 Pkt	0 Pkt	41 Pcnt	6.12 Pcnt
1784738356	12.53 Volt	110 Pkt	10 Pkt	43 Pcnt	13.39 Pcnt
1784738056	12.53 Volt	110 Pkt	20 Pkt	42 Pcnt	19.82 Pcnt
1784734306	12.53 Volt	20 Pkt	0 Pkt	14 Pcnt	0 Pcnt
1784734006	12.53 Volt	20 Pkt	0 Pkt	12 Pcnt	0 Pcnt
1784733706	12.53 Volt	10 Pkt	0 Pkt	9 Pcnt	0 Pcnt
1784733406	12.53 Volt	10 Pkt	0 Pkt	9 Pcnt	0 Pcnt
1784733106	12.53 Volt	10 Pkt	0 Pkt	8 Pcnt	0 Pcnt
1784732806	12.53 Volt	10 Pkt	0 Pkt	10 Pcnt	0 Pcnt
1784732506	12.53 Volt	10 Pkt	0 Pkt	8 Pcnt	0 Pcnt
1784732206	12.53 Volt	10 Pkt	0 Pkt	8 Pcnt	0 Pcnt
1784731906	12.53 Volt	10 Pkt	0 Pkt	9 Pcnt	0 Pcnt
1784731606	12.53 Volt	10 Pkt	0 Pkt	9 Pcnt	0 Pcnt
1784731306	12.53 Volt	10 Pkt	0 Pkt	8 Pcnt	0 Pcnt
1784731006	12.53 Volt	10 Pkt	0 Pkt	8 Pcnt	0 Pcnt
1784730706	12.53 Volt	10 Pkt	0 Pkt	6 Pcnt	0 Pcnt
1784730406	12.53 Volt	10 Pkt	0 Pkt	5 Pcnt	0 Pcnt
1784730107	12.53 Volt	10 Pkt	0 Pkt	5 Pcnt	0 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DgR1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)