OK5TVR-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK5TVR-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	RF->Inet*	DX_dist.*	live*	Temp_core*
1780598468	9 Pkts	7 Pkts	0 km	7 min.	90.56 C
1780597567	7 Pkts	6 Pkts	0 km	6 min.	53.33 C
1780596666	9 Pkts	8 Pkts	0 km	5 min.	53.33 C
1780595765	9 Pkts	9 Pkts	9 km	4 min.	53.33 C
1780594864	12 Pkts	11 Pkts	20 km	3 min.	53.33 C
1780593962	9 Pkts	9 Pkts	0 km	2 min.	53.33 C
1780593061	13 Pkts	8 Pkts	20 km	1 min.	53.33 C
1780592161	7 Pkts	4 Pkts	9 km	0 min.	94.44 C
1780591260	27 Pkts	26 Pkts	70 km	95 min.	53.33 C
1780590358	45 Pkts	44 Pkts	78 km	94 min.	53.33 C
1780589458	14 Pkts	14 Pkts	54 km	93 min.	53.33 C
1780588557	6 Pkts	6 Pkts	9 km	92 min.	53.33 C
1780587656	3 Pkts	3 Pkts	9 km	91 min.	53.33 C
1780586755	3 Pkts	3 Pkts	9 km	90 min.	53.33 C
1780585853	9 Pkts	8 Pkts	81 km	89 min.	92.78 C
1780584952	39 Pkts	38 Pkts	9 km	88 min.	96.11 C
1780584051	9 Pkts	6 Pkts	10 km	87 min.	53.33 C
1780583151	7 Pkts	5 Pkts	0 km	86 min.	53.33 C
1780582249	16 Pkts	16 Pkts	9 km	85 min.	53.33 C
1780581348	17 Pkts	16 Pkts	0 km	84 min.	53.33 C
1780580447	10 Pkts	9 Pkts	110 km	83 min.	53.33 C
1780579546	9 Pkts	8 Pkts	0 km	82 min.	70 C
1780578645	7 Pkts	6 Pkts	0 km	81 min.	53.33 C
1780577744	12 Pkts	12 Pkts	0 km	80 min.	53.33 C
1780576842	16 Pkts	16 Pkts	2 km	79 min.	53.33 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)