HB9FM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9FM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff1h*	Eff*
1773048785	14.1 Volt	290 Pkt	430 Pkt	59 Pcnt	55 Pcnt
1773048485	14.03 Volt	280 Pkt	330 Pkt	57 Pcnt	55 Pcnt
1773048185	14.1 Volt	280 Pkt	410 Pkt	55 Pcnt	55 Pcnt
1773047885	14.1 Volt	280 Pkt	450 Pkt	55 Pcnt	55 Pcnt
1773047585	14.1 Volt	260 Pkt	420 Pkt	53 Pcnt	55 Pcnt
1773047285	14.1 Volt	270 Pkt	400 Pkt	54 Pcnt	55 Pcnt
1773046985	14.1 Volt	280 Pkt	380 Pkt	55 Pcnt	55 Pcnt
1773046685	14.1 Volt	290 Pkt	430 Pkt	57 Pcnt	55 Pcnt
1773046385	14.1 Volt	290 Pkt	480 Pkt	57 Pcnt	55 Pcnt
1773046085	14.1 Volt	270 Pkt	490 Pkt	56 Pcnt	55 Pcnt
1773045785	14.1 Volt	260 Pkt	560 Pkt	57 Pcnt	55 Pcnt
1773045485	14.03 Volt	240 Pkt	450 Pkt	55 Pcnt	55 Pcnt
1773045185	14.1 Volt	230 Pkt	360 Pkt	54 Pcnt	55 Pcnt
1773044885	14.1 Volt	230 Pkt	370 Pkt	54 Pcnt	55 Pcnt
1773044585	14.1 Volt	220 Pkt	280 Pkt	55 Pcnt	55 Pcnt
1773044285	14.1 Volt	230 Pkt	340 Pkt	55 Pcnt	55 Pcnt
1773043985	14.1 Volt	220 Pkt	500 Pkt	55 Pcnt	55 Pcnt
1773043685	14.1 Volt	220 Pkt	640 Pkt	54 Pcnt	55 Pcnt
1773043385	14.1 Volt	200 Pkt	470 Pkt	54 Pcnt	55 Pcnt
1773043085	14.03 Volt	190 Pkt	290 Pkt	53 Pcnt	55 Pcnt
1773042785	14.1 Volt	190 Pkt	230 Pkt	54 Pcnt	55 Pcnt
1773042485	14.1 Volt	190 Pkt	150 Pkt	54 Pcnt	55 Pcnt
1773042185	14.1 Volt	200 Pkt	290 Pkt	55 Pcnt	55 Pcnt
1773041885	14.1 Volt	200 Pkt	380 Pkt	56 Pcnt	55 Pcnt
1773041585	14.1 Volt	190 Pkt	360 Pkt	58 Pcnt	55 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Rx10m: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)