BM3JAS-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM3JAS-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1789968006	23 cnt	20 cnt	0 cnt	3 cnt
1789967406	36 cnt	25 cnt	6 cnt	5 cnt
1789966806	52 cnt	34 cnt	15 cnt	3 cnt
1789966206	27 cnt	24 cnt	0 cnt	3 cnt
1789965606	33 cnt	28 cnt	0 cnt	5 cnt
1789965006	43 cnt	31 cnt	4 cnt	8 cnt
1789964406	37 cnt	28 cnt	2 cnt	7 cnt
1789963806	27 cnt	24 cnt	1 cnt	2 cnt
1789963206	34 cnt	28 cnt	2 cnt	4 cnt
1789962605	29 cnt	27 cnt	2 cnt	0 cnt
1789962005	31 cnt	25 cnt	3 cnt	3 cnt
1789961405	31 cnt	27 cnt	1 cnt	3 cnt
1789960805	35 cnt	27 cnt	1 cnt	7 cnt
1789960205	35 cnt	29 cnt	3 cnt	3 cnt
1789959605	37 cnt	28 cnt	3 cnt	6 cnt
1789959005	33 cnt	27 cnt	0 cnt	6 cnt
1789958405	49 cnt	40 cnt	2 cnt	7 cnt
1789957806	36 cnt	36 cnt	0 cnt	0 cnt
1789957205	27 cnt	24 cnt	2 cnt	1 cnt
1789956605	30 cnt	27 cnt	1 cnt	2 cnt
1789956005	39 cnt	32 cnt	1 cnt	6 cnt
1789955405	41 cnt	39 cnt	0 cnt	2 cnt
1789954805	35 cnt	32 cnt	0 cnt	3 cnt
1789954205	41 cnt	34 cnt	5 cnt	2 cnt
1789953605	47 cnt	41 cnt	1 cnt	5 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)