DG5NET-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG5NET-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1787585309	39 Count	0 Count	0 Count	0 VDC	0 VDC
1787578108	38 Count	0 Count	0 Count	0 VDC	0 VDC
1787578079	37 Count	0 Count	0 Count	0 VDC	0 VDC
1787571138	36 Count	0 Count	0 Count	0 VDC	0 VDC
1787563937	35 Count	0 Count	0 Count	0 VDC	0 VDC
1787556737	34 Count	0 Count	0 Count	0 VDC	0 VDC
1787549536	33 Count	0 Count	0 Count	0 VDC	0 VDC
1787542335	32 Count	0 Count	0 Count	0 VDC	0 VDC
1787535135	31 Count	0 Count	0 Count	0 VDC	0 VDC
1787527934	30 Count	0 Count	0 Count	0 VDC	0 VDC
1787520733	29 Count	0 Count	0 Count	0 VDC	0 VDC
1787513532	28 Count	0 Count	0 Count	0 VDC	0 VDC
1787506331	27 Count	0 Count	0 Count	0 VDC	0 VDC
1787499131	26 Count	0 Count	0 Count	0 VDC	0 VDC
1787491935	25 Count	0 Count	0 Count	0 VDC	0 VDC
1787484734	24 Count	0 Count	0 Count	0 VDC	0 VDC
1787477534	23 Count	0 Count	0 Count	0 VDC	0 VDC
1787470333	22 Count	0 Count	0 Count	0 VDC	0 VDC
1787463157	21 Count	0 Count	0 Count	0 VDC	0 VDC
1787455931	20 Count	0 Count	0 Count	0 VDC	0 VDC
1787448731	19 Count	0 Count	0 Count	0 VDC	0 VDC
1787441530	18 Count	0 Count	0 Count	0 VDC	0 VDC
1787434329	17 Count	0 Count	0 Count	0 VDC	0 VDC
1787427129	16 Count	0 Count	0 Count	0 VDC	0 VDC
1787419928	15 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)