IW3BRC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW3BRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Temp*	Value2*	Value3*	Value4*	Value5*
1765711819	59.1 Deg.C	0	0	0	0
1765708202	58 Deg.C	0	0	0	0
1765697401	58.5 Deg.C	0	0	0	0
1765693802	59.1 Deg.C	0	0	0	0
1765690202	60.1 Deg.C	0	0	0	0
1765686602	58 Deg.C	0	0	0	0
1765683001	57.5 Deg.C	0	0	0	0
1765679401	58 Deg.C	0	0	0	0
1765675802	58 Deg.C	0	0	0	0
1765668602	58 Deg.C	0	0	0	0
1765657801	58 Deg.C	0	0	0	0
1765654202	57.5 Deg.C	0	0	0	0
1765647001	58 Deg.C	0	0	0	0
1765639802	57.5 Deg.C	0	0	0	0
1765636202	58 Deg.C	0	0	0	0
1765632628	58 Deg.C	0	0	0	0
1765629002	58 Deg.C	0	0	0	0
1765625402	59.6 Deg.C	0	0	0	0
1765614602	58 Deg.C	0	0	0	0
1765611002	58.5 Deg.C	0	0	0	0
1765607402	59.1 Deg.C	0	0	0	0
1765603802	59.1 Deg.C	0	0	0	0
1765600201	56.9 Deg.C	0	0	0	0
1765596601	58 Deg.C	0	0	0	0
1765593002	57.5 Deg.C	0	0	0	0

*Used Equation Coefficients:

CPU Temp: 0, 0.1, 0

Value2: 0, 0, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)