BM2OBM-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM2OBM-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	RxPkts/10m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1789962177	39 C	11 p	78 p	2079 p	10389 p
1789960976	40 C	13 p	81 p	2055 p	10382 p
1789959777	40 C	13 p	84 p	2027 p	10373 p
1789958577	40 C	11 p	96 p	2001 p	10367 p
1789957377	40 C	12 p	107 p	1974 p	10360 p
1789956176	40 C	14 p	109 p	1943 p	10348 p
1789954977	40 C	21 p	104 p	1905 p	10335 p
1789953777	40 C	15 p	97 p	1867 p	10322 p
1789952576	39 C	18 p	113 p	1834 p	10310 p
1789951376	39 C	15 p	133 p	1801 p	10298 p
1789950177	38 C	19 p	158 p	1770 p	10287 p
1789948977	38 C	23 p	166 p	1721 p	10274 p
1789947777	37 C	23 p	166 p	1668 p	10259 p
1789946577	37 C	34 p	141 p	1612 p	10242 p
1789945376	36 C	29 p	120 p	1555 p	10219 p
1789944177	36 C	12 p	100 p	1502 p	10205 p
1789942977	36 C	15 p	102 p	1471 p	10196 p
1789941776	35 C	17 p	99 p	1435 p	10183 p
1789940576	36 C	17 p	94 p	1402 p	10172 p
1789939376	36 C	15 p	87 p	1369 p	10159 p
1789938177	36 C	15 p	75 p	1336 p	10147 p
1789936976	36 C	12 p	64 p	1308 p	10138 p
1789935778	36 C	12 p	62 p	1282 p	10130 p
1789934577	36 C	7 p	70 p	1261 p	10124 p
1789933376	36 C	11 p	73 p	1244 p	10120 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/10m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)