HP2PCO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP2PCO-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1776979942	12.38 Volt	90 Pkt	30 Pkt	88 Pcnt
1776977539	12.38 Volt	100 Pkt	30 Pkt	92 Pcnt
1776976939	12.38 Volt	120 Pkt	30 Pkt	90 Pcnt
1776976338	12.38 Volt	130 Pkt	30 Pkt	90 Pcnt
1776975738	12.38 Volt	120 Pkt	30 Pkt	89 Pcnt
1776975137	12.38 Volt	130 Pkt	30 Pkt	89 Pcnt
1776973335	12.38 Volt	100 Pkt	30 Pkt	85 Pcnt
1776970933	12.38 Volt	110 Pkt	30 Pkt	83 Pcnt
1776969732	12.38 Volt	120 Pkt	30 Pkt	80 Pcnt
1776966131	12.38 Volt	130 Pkt	30 Pkt	79 Pcnt
1776962525	12.38 Volt	150 Pkt	40 Pkt	84 Pcnt
1776960724	12.38 Volt	140 Pkt	30 Pkt	77 Pcnt
1776960123	12.38 Volt	140 Pkt	30 Pkt	74 Pcnt
1776955318	12.38 Volt	170 Pkt	30 Pkt	62 Pcnt
1776954117	12.38 Volt	160 Pkt	30 Pkt	65 Pcnt
1776953516	12.38 Volt	160 Pkt	30 Pkt	65 Pcnt
1776952916	12.38 Volt	150 Pkt	30 Pkt	69 Pcnt
1776952315	12.38 Volt	150 Pkt	30 Pkt	72 Pcnt
1776951715	12.38 Volt	140 Pkt	30 Pkt	75 Pcnt
1776951114	12.38 Volt	140 Pkt	30 Pkt	77 Pcnt
1776950513	12.38 Volt	140 Pkt	40 Pkt	78 Pcnt
1776949913	12.38 Volt	130 Pkt	30 Pkt	81 Pcnt
1776949312	12.38 Volt	130 Pkt	40 Pkt	82 Pcnt
1776948712	12.38 Volt	120 Pkt	30 Pkt	83 Pcnt
1776947510	12.38 Volt	110 Pkt	40 Pkt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)