LD7TG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LD7TG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772777680	13.88 Volt	350 Pkt	70 Pkt	61 Pcnt
1772774080	13.88 Volt	330 Pkt	70 Pkt	64 Pcnt
1772770480	13.88 Volt	310 Pkt	70 Pkt	60 Pcnt
1772766881	13.88 Volt	300 Pkt	70 Pkt	59 Pcnt
1772763281	13.8 Volt	300 Pkt	80 Pkt	60 Pcnt
1772759681	13.8 Volt	290 Pkt	80 Pkt	63 Pcnt
1772756081	13.8 Volt	310 Pkt	70 Pkt	62 Pcnt
1772752481	13.88 Volt	300 Pkt	70 Pkt	60 Pcnt
1772748881	13.88 Volt	330 Pkt	70 Pkt	61 Pcnt
1772745281	13.88 Volt	410 Pkt	90 Pkt	63 Pcnt
1772741682	13.88 Volt	350 Pkt	80 Pkt	63 Pcnt
1772738082	13.88 Volt	370 Pkt	70 Pkt	64 Pcnt
1772734482	13.8 Volt	370 Pkt	70 Pkt	58 Pcnt
1772730882	13.88 Volt	330 Pkt	70 Pkt	63 Pcnt
1772727282	13.88 Volt	420 Pkt	90 Pkt	68 Pcnt
1772723682	13.88 Volt	450 Pkt	110 Pkt	66 Pcnt
1772720082	13.88 Volt	380 Pkt	80 Pkt	70 Pcnt
1772716483	13.8 Volt	410 Pkt	90 Pkt	70 Pcnt
1772712883	13.8 Volt	430 Pkt	80 Pkt	68 Pcnt
1772709283	13.8 Volt	390 Pkt	80 Pkt	69 Pcnt
1772705683	13.88 Volt	380 Pkt	80 Pkt	65 Pcnt
1772702083	13.88 Volt	360 Pkt	70 Pkt	61 Pcnt
1772698483	13.8 Volt	360 Pkt	80 Pkt	66 Pcnt
1772694883	13.88 Volt	340 Pkt	60 Pkt	60 Pcnt
1772691284	13.88 Volt	290 Pkt	60 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)