ON0LB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0LB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Effto*
1765527805	12.96 Volt	610 Pkt	270 Pkt	71 Pcnt	68 Pcnt
1765527204	12.96 Volt	620 Pkt	270 Pkt	72 Pcnt	68 Pcnt
1765526604	12.96 Volt	600 Pkt	280 Pkt	72 Pcnt	68 Pcnt
1765526003	12.96 Volt	610 Pkt	280 Pkt	74 Pcnt	68 Pcnt
1765525403	12.96 Volt	590 Pkt	270 Pkt	74 Pcnt	68 Pcnt
1765524802	12.96 Volt	590 Pkt	260 Pkt	74 Pcnt	68 Pcnt
1765524202	12.96 Volt	570 Pkt	250 Pkt	73 Pcnt	68 Pcnt
1765523601	12.96 Volt	570 Pkt	250 Pkt	71 Pcnt	68 Pcnt
1765523001	12.96 Volt	560 Pkt	230 Pkt	70 Pcnt	68 Pcnt
1765522400	12.96 Volt	530 Pkt	230 Pkt	70 Pcnt	68 Pcnt
1765521799	12.96 Volt	520 Pkt	230 Pkt	70 Pcnt	68 Pcnt
1765521199	12.96 Volt	500 Pkt	220 Pkt	70 Pcnt	68 Pcnt
1765520598	12.96 Volt	510 Pkt	230 Pkt	70 Pcnt	68 Pcnt
1765520018	12.96 Volt	500 Pkt	230 Pkt	71 Pcnt	68 Pcnt
1765519397	12.96 Volt	500 Pkt	220 Pkt	72 Pcnt	68 Pcnt
1765518797	12.96 Volt	510 Pkt	230 Pkt	74 Pcnt	68 Pcnt
1765518196	12.96 Volt	530 Pkt	230 Pkt	73 Pcnt	68 Pcnt
1765517596	12.96 Volt	550 Pkt	240 Pkt	74 Pcnt	68 Pcnt
1765516995	12.96 Volt	550 Pkt	240 Pkt	75 Pcnt	68 Pcnt
1765516394	12.96 Volt	550 Pkt	240 Pkt	73 Pcnt	68 Pcnt
1765515794	12.96 Volt	550 Pkt	250 Pkt	72 Pcnt	68 Pcnt
1765515193	12.96 Volt	550 Pkt	250 Pkt	70 Pcnt	68 Pcnt
1765514593	12.96 Volt	530 Pkt	250 Pkt	71 Pcnt	68 Pcnt
1765513992	12.96 Volt	530 Pkt	240 Pkt	69 Pcnt	68 Pcnt
1765513392	12.96 Volt	520 Pkt	240 Pkt	69 Pcnt	68 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Effto: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)