IR2DF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2DF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1772845498	14 Pkt	90 Pkt	5 Pkt	28.94 Pcnt	58 Pcnt
1772845198	17 Pkt	90 Pkt	5 Pkt	28.94 Pcnt	56 Pcnt
1772844898	13 Pkt	100 Pkt	2 Pkt	28.94 Pcnt	57 Pcnt
1772844598	17 Pkt	100 Pkt	6 Pkt	28.94 Pcnt	58 Pcnt
1772844298	16 Pkt	100 Pkt	7 Pkt	28.94 Pcnt	60 Pcnt
1772843998	12 Pkt	100 Pkt	3 Pkt	28.94 Pcnt	60 Pcnt
1772843698	17 Pkt	100 Pkt	7 Pkt	28.94 Pcnt	61 Pcnt
1772843398	20 Pkt	100 Pkt	7 Pkt	28.94 Pcnt	61 Pcnt
1772843098	18 Pkt	100 Pkt	3 Pkt	28.93 Pcnt	59 Pcnt
1772842798	21 Pkt	100 Pkt	7 Pkt	28.94 Pcnt	55 Pcnt
1772842498	15 Pkt	100 Pkt	7 Pkt	28.94 Pcnt	56 Pcnt
1772842198	10 Pkt	100 Pkt	3 Pkt	28.94 Pcnt	54 Pcnt
1772841898	19 Pkt	100 Pkt	7 Pkt	28.93 Pcnt	55 Pcnt
1772841598	19 Pkt	100 Pkt	7 Pkt	28.94 Pcnt	53 Pcnt
1772841298	15 Pkt	100 Pkt	3 Pkt	28.93 Pcnt	51 Pcnt
1772840398	14 Pkt	110 Pkt	3 Pkt	28.93 Pcnt	52 Pcnt
1772840098	18 Pkt	110 Pkt	7 Pkt	28.93 Pcnt	53 Pcnt
1772839798	18 Pkt	110 Pkt	7 Pkt	28.93 Pcnt	53 Pcnt
1772839499	19 Pkt	110 Pkt	3 Pkt	28.93 Pcnt	53 Pcnt
1772839198	25 Pkt	110 Pkt	7 Pkt	28.93 Pcnt	54 Pcnt
1772838899	17 Pkt	110 Pkt	7 Pkt	28.93 Pcnt	55 Pcnt
1772838599	9 Pkt	110 Pkt	3 Pkt	28.93 Pcnt	53 Pcnt
1772838299	19 Pkt	110 Pkt	7 Pkt	28.93 Pcnt	53 Pcnt
1772837999	20 Pkt	100 Pkt	7 Pkt	28.93 Pcnt	53 Pcnt
1772837699	15 Pkt	100 Pkt	3 Pkt	28.93 Pcnt	54 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)