DG1SGW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG1SGW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*
1765532546	29.5 deg C	33.9 %
1765531646	28.7 deg C	33.9 %
1765530746	28.7 deg C	33.8 %
1765529846	28.7 deg C	33.8 %
1765529517	28.7 deg C	33.7 %
1765528616	28.8 deg C	33.5 %
1765527716	28.9 deg C	33.4 %
1765526816	29 deg C	33.4 %
1765525916	29.1 deg C	33.3 %
1765524116	29.2 deg C	33.1 %
1765523216	29.3 deg C	33.1 %
1765522334	29.3 deg C	33.1 %
1765521416	29.3 deg C	33.1 %
1765520516	29.3 deg C	33 %
1765519616	29.4 deg C	33 %
1765518715	29.4 deg C	32.9 %
1765517815	29.4 deg C	33 %
1765517574	29.4 deg C	33 %
1765516674	29.3 deg C	33.1 %
1765515774	29.2 deg C	33 %
1765514874	29.1 deg C	33.2 %
1765513973	28.9 deg C	33.3 %
1765513073	28.7 deg C	33.4 %
1765512173	28.5 deg C	33.7 %
1765511273	28.2 deg C	34 %

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humi: 0, 0.1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)