LD3GE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LD3GE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784759128	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1784757928	0.02 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	5 count/10m
1784756728	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	5 count/10m
1784755528	0.03 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	7 count/10m
1784754328	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	7 count/10m
1784753128	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	5 count/10m
1784751928	0.03 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	7 count/10m
1784750728	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1784749528	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	4 count/10m
1784748328	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	7 count/10m
1784747128	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	7 count/10m
1784745928	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	5 count/10m
1784744728	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	5 count/10m
1784743528	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	6 count/10m
1784742328	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	7 count/10m
1784741128	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1784739928	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1784738728	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	5 count/10m
1784737528	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	7 count/10m
1784736328	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1784735128	0.02 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	5 count/10m
1784733928	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	6 count/10m
1784732728	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	7 count/10m
1784731528	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	5 count/10m
1784730328	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)