EA2RCJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA2RCJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx1h*	Eff*	Volt*	Temp*
1777757208	70 Pkt	70 Pkt	99 Pcnt	12.14 Volt	-64 C
1777756609	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777756008	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777754809	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777754808	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777753608	90 Pkt	90 Pkt	99 Pcnt	12.14 Volt	-64 C
1777753009	90 Pkt	90 Pkt	99 Pcnt	12.14 Volt	-64 C
1777752408	90 Pkt	90 Pkt	99 Pcnt	12.14 Volt	-64 C
1777751209	90 Pkt	90 Pkt	99 Pcnt	12.14 Volt	-64 C
1777751208	90 Pkt	90 Pkt	99 Pcnt	12.14 Volt	-64 C
1777750008	80 Pkt	80 Pkt	99 Pcnt	11.91 Volt	-64 C
1777748808	70 Pkt	70 Pkt	99 Pcnt	12.14 Volt	-64 C
1777747609	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777747608	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777746409	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777745208	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777744009	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777742809	70 Pkt	70 Pkt	99 Pcnt	12.14 Volt	-64 C
1777742209	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777741609	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777740409	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777740409	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777739209	80 Pkt	80 Pkt	99 Pcnt	12.06 Volt	-64 C
1777738009	80 Pkt	80 Pkt	99 Pcnt	12.14 Volt	-64 C
1777736809	70 Pkt	70 Pkt	99 Pcnt	12.14 Volt	-64 C

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Eff: 0, 1, 0

Volt: 0, 0.074, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)