KR2C-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KR2C-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1780617876	0.09 Rx Erlang	0.03 Tx Erlang	75 count/10m	9 count/10m	20 count/10m
1780616676	0.12 Rx Erlang	0.03 Tx Erlang	79 count/10m	26 count/10m	20 count/10m
1780615476	0.12 Rx Erlang	0.04 Tx Erlang	87 count/10m	40 count/10m	31 count/10m
1780614276	0.13 Rx Erlang	0.04 Tx Erlang	92 count/10m	23 count/10m	28 count/10m
1780613076	0.05 Rx Erlang	0.03 Tx Erlang	23 count/10m	5 count/10m	14 count/10m
1780611876	0.04 Rx Erlang	0.02 Tx Erlang	22 count/10m	7 count/10m	8 count/10m
1780610676	0.02 Rx Erlang	0.02 Tx Erlang	17 count/10m	5 count/10m	11 count/10m
1780609476	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	1 count/10m	1 count/10m
1780608276	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	6 count/10m	4 count/10m
1780607076	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	2 count/10m	8 count/10m
1780605876	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	4 count/10m	6 count/10m
1780604676	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	4 count/10m	7 count/10m
1780603476	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	5 count/10m	6 count/10m
1780602276	0.05 Rx Erlang	0.02 Tx Erlang	26 count/10m	15 count/10m	14 count/10m
1780601076	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	2 count/10m	2 count/10m
1780599876	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	2 count/10m	2 count/10m
1780598676	0.03 Rx Erlang	0.01 Tx Erlang	19 count/10m	3 count/10m	7 count/10m
1780597476	0.03 Rx Erlang	0.01 Tx Erlang	19 count/10m	5 count/10m	5 count/10m
1780596276	0.02 Rx Erlang	0.01 Tx Erlang	12 count/10m	2 count/10m	3 count/10m
1780595076	0.04 Rx Erlang	0.01 Tx Erlang	18 count/10m	12 count/10m	5 count/10m
1780593876	0.04 Rx Erlang	0.01 Tx Erlang	17 count/10m	9 count/10m	5 count/10m
1780592676	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	2 count/10m	5 count/10m
1780591476	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	5 count/10m	7 count/10m
1780590276	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	4 count/10m	10 count/10m
1780589076	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	3 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)