PP1RK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PP1RK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789968569	13.28 Volt	140 Pkt	60 Pkt	98 Pcnt
1789964965	13.28 Volt	150 Pkt	60 Pkt	96 Pcnt
1789961362	13.28 Volt	140 Pkt	60 Pkt	94 Pcnt
1789957758	13.28 Volt	150 Pkt	60 Pkt	100 Pcnt
1789954155	13.28 Volt	140 Pkt	50 Pkt	93 Pcnt
1789950552	13.28 Volt	90 Pkt	30 Pkt	59 Pcnt
1789946948	13.28 Volt	100 Pkt	10 Pkt	64 Pcnt
1789943345	13.28 Volt	130 Pkt	40 Pkt	78 Pcnt
1789939741	13.28 Volt	90 Pkt	20 Pkt	56 Pcnt
1789936138	13.28 Volt	100 Pkt	30 Pkt	65 Pcnt
1789932534	13.28 Volt	110 Pkt	30 Pkt	66 Pcnt
1789928931	13.28 Volt	110 Pkt	30 Pkt	68 Pcnt
1789925327	13.28 Volt	110 Pkt	20 Pkt	68 Pcnt
1789921724	13.28 Volt	110 Pkt	20 Pkt	69 Pcnt
1789918120	13.28 Volt	140 Pkt	50 Pkt	84 Pcnt
1789914517	13.28 Volt	170 Pkt	70 Pkt	98 Pcnt
1789910914	13.28 Volt	170 Pkt	70 Pkt	97 Pcnt
1789907310	13.28 Volt	230 Pkt	90 Pkt	91 Pcnt
1789903707	13.28 Volt	200 Pkt	80 Pkt	95 Pcnt
1789900103	13.28 Volt	150 Pkt	60 Pkt	95 Pcnt
1789896500	13.28 Volt	160 Pkt	70 Pkt	99 Pcnt
1789892932	13.28 Volt	160 Pkt	70 Pkt	98 Pcnt
1789889293	13.28 Volt	170 Pkt	70 Pkt	98 Pcnt
1789885689	13.28 Volt	160 Pkt	70 Pkt	99 Pcnt
1789882086	13.28 Volt	160 Pkt	70 Pkt	98 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)