W1HS-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W1HS-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	DgR1h*
1781376432	14.25 Volt	460 Pkt	130 Pkt	89 Pcnt	29424 Pcnt
1781376132	14.25 Volt	460 Pkt	120 Pkt	88 Pcnt	26724 Pcnt
1781375832	14.25 Volt	470 Pkt	120 Pkt	89 Pcnt	26326 Pcnt
1781375532	14.18 Volt	480 Pkt	120 Pkt	89 Pcnt	26666 Pcnt
1781375232	14.25 Volt	480 Pkt	130 Pkt	90 Pcnt	26844 Pcnt
1781374934	14.25 Volt	480 Pkt	120 Pkt	91 Pcnt	26283 Pcnt
1781374932	14.25 Volt	480 Pkt	120 Pkt	91 Pcnt	26283 Pcnt
1781374632	14.25 Volt	480 Pkt	120 Pkt	91 Pcnt	26434 Pcnt
1781374332	14.18 Volt	470 Pkt	120 Pkt	90 Pcnt	25995 Pcnt
1781374032	14.25 Volt	470 Pkt	120 Pkt	90 Pcnt	26638 Pcnt
1781373732	14.18 Volt	470 Pkt	120 Pkt	89 Pcnt	26808 Pcnt
1781373432	14.18 Volt	460 Pkt	120 Pkt	88 Pcnt	27548 Pcnt
1781373133	14.25 Volt	460 Pkt	120 Pkt	88 Pcnt	27096 Pcnt
1781373132	14.25 Volt	460 Pkt	120 Pkt	88 Pcnt	27096 Pcnt
1781372832	14.18 Volt	460 Pkt	120 Pkt	88 Pcnt	26865 Pcnt
1781372532	14.18 Volt	460 Pkt	120 Pkt	87 Pcnt	27096 Pcnt
1781372232	14.25 Volt	460 Pkt	120 Pkt	87 Pcnt	27922 Pcnt
1781371932	14.18 Volt	460 Pkt	130 Pkt	86 Pcnt	27896 Pcnt
1781371632	14.25 Volt	460 Pkt	120 Pkt	85 Pcnt	27826 Pcnt
1781371333	14.25 Volt	450 Pkt	130 Pkt	86 Pcnt	28384 Pcnt
1781371332	14.25 Volt	450 Pkt	130 Pkt	86 Pcnt	28384 Pcnt
1781371032	14.18 Volt	460 Pkt	120 Pkt	86 Pcnt	27623 Pcnt
1781370732	14.18 Volt	470 Pkt	120 Pkt	86 Pcnt	27215 Pcnt
1781370432	14.25 Volt	470 Pkt	120 Pkt	86 Pcnt	27118 Pcnt
1781370132	14.25 Volt	470 Pkt	130 Pkt	86 Pcnt	27426 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DgR1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)