SR2KG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2KG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Eff*	Eff1h*	Vin*
1784662076	13 Pcnt	0 Pcnt	14.06 Volt
1784659196	14 Pcnt	0 Pcnt	14.06 Volt
1784656316	14 Pcnt	0 Pcnt	14.14 Volt
1784653437	14 Pcnt	0 Pcnt	14.14 Volt
1784650556	14 Pcnt	0 Pcnt	14.14 Volt
1784647676	14 Pcnt	0 Pcnt	14.14 Volt
1784644796	14 Pcnt	0 Pcnt	14.14 Volt
1784641916	14 Pcnt	0 Pcnt	14.14 Volt
1784639036	15 Pcnt	0 Pcnt	14.14 Volt
1784636156	15 Pcnt	0 Pcnt	14.06 Volt
1784633276	15 Pcnt	0 Pcnt	14.06 Volt
1784630396	15 Pcnt	0 Pcnt	14.14 Volt
1784627516	16 Pcnt	0 Pcnt	14.14 Volt
1784624637	16 Pcnt	0 Pcnt	14.06 Volt
1784621757	17 Pcnt	5 Pcnt	14.14 Volt
1784618877	19 Pcnt	18 Pcnt	14.06 Volt
1784615997	19 Pcnt	30 Pcnt	14.14 Volt
1784613117	18 Pcnt	40 Pcnt	14.06 Volt
1784610237	17 Pcnt	26 Pcnt	14.14 Volt
1784607357	15 Pcnt	30 Pcnt	14.06 Volt
1784604477	12 Pcnt	9 Pcnt	14.06 Volt
1784601597	12 Pcnt	25 Pcnt	14.14 Volt
1784598717	7 Pcnt	11 Pcnt	14.14 Volt
1784596557	0 Pcnt	0 Pcnt	14.06 Volt
1784591165	40 Pcnt	61 Pcnt	14.06 Volt

*Used Equation Coefficients:

Eff: 0, 1, 0

Eff1h: 0, 1, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Vin: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)