IZ1XBB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1XBB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1787574524	13.8 Volt	530 Pkt	130 Pkt	88 Pcnt
1787573925	13.8 Volt	540 Pkt	140 Pkt	88 Pcnt
1787573323	13.8 Volt	530 Pkt	150 Pkt	85 Pcnt
1787572739	13.8 Volt	520 Pkt	140 Pkt	84 Pcnt
1787572122	13.8 Volt	520 Pkt	140 Pkt	84 Pcnt
1787571521	13.8 Volt	520 Pkt	130 Pkt	83 Pcnt
1787570921	13.8 Volt	540 Pkt	130 Pkt	84 Pcnt
1787570320	13.8 Volt	550 Pkt	130 Pkt	86 Pcnt
1787569721	13.8 Volt	570 Pkt	120 Pkt	89 Pcnt
1787569120	13.8 Volt	570 Pkt	120 Pkt	91 Pcnt
1787568519	13.8 Volt	570 Pkt	130 Pkt	91 Pcnt
1787567953	13.8 Volt	580 Pkt	130 Pkt	92 Pcnt
1787567318	13.8 Volt	580 Pkt	130 Pkt	94 Pcnt
1787566720	12.83 Volt	560 Pkt	130 Pkt	94 Pcnt
1787566125	13.8 Volt	560 Pkt	130 Pkt	93 Pcnt
1787565517	13.8 Volt	550 Pkt	120 Pkt	93 Pcnt
1787564926	13.8 Volt	520 Pkt	120 Pkt	92 Pcnt
1787564325	13.8 Volt	490 Pkt	120 Pkt	91 Pcnt
1787563721	13.8 Volt	470 Pkt	120 Pkt	91 Pcnt
1787563115	13.8 Volt	480 Pkt	120 Pkt	91 Pcnt
1787562513	12.53 Volt	490 Pkt	120 Pkt	91 Pcnt
1787561916	13.8 Volt	490 Pkt	120 Pkt	90 Pcnt
1787561324	13.8 Volt	510 Pkt	120 Pkt	89 Pcnt
1787560716	13.8 Volt	520 Pkt	120 Pkt	88 Pcnt
1787560111	13.05 Volt	530 Pkt	120 Pkt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)