E22ZMG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22ZMG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1765783909	9 ug/m3	11 ug/m3	11 ug/m3	-30 dBm	13.06 V
1765783284	10 ug/m3	13 ug/m3	13 ug/m3	-32 dBm	13.1 V
1765782659	10 ug/m3	12 ug/m3	12 ug/m3	-31 dBm	13.13 V
1765782035	9 ug/m3	12 ug/m3	12 ug/m3	-31 dBm	13.06 V
1765781410	11 ug/m3	15 ug/m3	15 ug/m3	-31 dBm	13.1 V
1765780786	8 ug/m3	11 ug/m3	11 ug/m3	-33 dBm	13.13 V
1765780162	10 ug/m3	13 ug/m3	13 ug/m3	-33 dBm	13.1 V
1765779537	8 ug/m3	11 ug/m3	11 ug/m3	-31 dBm	13.1 V
1765778913	10 ug/m3	13 ug/m3	13 ug/m3	-31 dBm	13.13 V
1765778288	9 ug/m3	13 ug/m3	13 ug/m3	-31 dBm	13.1 V
1765777663	9 ug/m3	11 ug/m3	11 ug/m3	-31 dBm	13.08 V
1765777039	11 ug/m3	14 ug/m3	14 ug/m3	-31 dBm	13.1 V
1765776442	9 ug/m3	11 ug/m3	12 ug/m3	-32 dBm	13.1 V
1765775790	11 ug/m3	17 ug/m3	18 ug/m3	-31 dBm	13.1 V
1765775163	13 ug/m3	20 ug/m3	20 ug/m3	-30 dBm	13.13 V
1765774535	13 ug/m3	19 ug/m3	19 ug/m3	-31 dBm	13.1 V
1765773909	13 ug/m3	19 ug/m3	19 ug/m3	-31 dBm	13.1 V
1765773280	14 ug/m3	20 ug/m3	20 ug/m3	-31 dBm	13.13 V
1765772657	14 ug/m3	22 ug/m3	22 ug/m3	-32 dBm	13.1 V
1765772022	16 ug/m3	21 ug/m3	21 ug/m3	-31 dBm	13.1 V
1765771397	17 ug/m3	23 ug/m3	23 ug/m3	-31 dBm	13.1 V
1765770773	19 ug/m3	25 ug/m3	26 ug/m3	-30 dBm	13.1 V
1765770147	19 ug/m3	26 ug/m3	26 ug/m3	-31 dBm	13.15 V
1765769521	19 ug/m3	29 ug/m3	29 ug/m3	-32 dBm	13.1 V
1765768896	18 ug/m3	24 ug/m3	24 ug/m3	-31 dBm	13.08 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)