PU2LYJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU2LYJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	U.Rel.*	UpTime*	Pkts*	VCC*
1773356686	28 *C	75 %	2 hours	213 pkts	13.3 volts
1773353682	29 *C	74 %	1 hours	185 pkts	13.4 volts
1773352669	29 *C	71 %	1 hours	213 pkts	13.4 volts
1773351654	29 *C	71 %	1 hours	192 pkts	13.4 volts
1773349614	29 *C	71 %	0 hours	231 pkts	13.3 volts
1773346569	28 *C	74 %	0 hours	219 pkts	13.4 volts
1773343638	26 *C	87 %	0 hours	3 pkts	13.4 volts
1773338501	28 *C	76 %	7 hours	194 pkts	13.4 volts
1773336485	28 *C	74 %	6 hours	248 pkts	13.4 volts
1773335480	28 *C	74 %	6 hours	228 pkts	13.4 volts
1773333418	28 *C	75 %	5 hours	279 pkts	13.3 volts
1773332374	28 *C	74 %	5 hours	247 pkts	13.4 volts
1773331360	28 *C	76 %	5 hours	282 pkts	13.4 volts
1773330319	28 *C	75 %	5 hours	272 pkts	13.4 volts
1773329287	28 *C	77 %	4 hours	260 pkts	13.4 volts
1773328247	28 *C	77 %	4 hours	301 pkts	13.4 volts
1773327159	28 *C	78 %	4 hours	313 pkts	11.4 volts
1773325065	28 *C	72 %	3 hours	265 pkts	13.4 volts
1773322950	28 *C	73 %	3 hours	347 pkts	13.4 volts
1773321861	28 *C	73 %	3 hours	292 pkts	13.4 volts
1773320805	28 *C	73 %	2 hours	297 pkts	13.4 volts
1773319737	-	-	-	-	-
1773317656	27 *C	74 %	2 hours	273 pkts	13.4 volts
1773316619	27 *C	73 %	1 hours	247 pkts	13.4 volts
1773310333	25 *C	90 %	0 hours	249 pkts	13.4 volts

*Used Equation Coefficients:

Temp: 0, 1, 0

U.Rel.: 0, 1, 0

UpTime: 0, 1, 0

Pkts: 0, 1, 0

VCC: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)