IR0UDY-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR0UDY-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1761563324	2 Pkt	10 Pkt	2 Pkt	56.16 Pcnt	26 Pcnt
1761563024	1 Pkt	10 Pkt	1 Pkt	56.16 Pcnt	24 Pcnt
1761562724	1 Pkt	10 Pkt	1 Pkt	56.16 Pcnt	21 Pcnt
1761562424	2 Pkt	10 Pkt	2 Pkt	56.16 Pcnt	22 Pcnt
1761562124	4 Pkt	10 Pkt	2 Pkt	56.16 Pcnt	22 Pcnt
1761561824	4 Pkt	10 Pkt	2 Pkt	56.15 Pcnt	22 Pcnt
1761561524	2 Pkt	10 Pkt	2 Pkt	56.16 Pcnt	25 Pcnt
1761561224	2 Pkt	10 Pkt	2 Pkt	56.15 Pcnt	26 Pcnt
1761560924	2 Pkt	20 Pkt	2 Pkt	56.15 Pcnt	26 Pcnt
1761560626	1 Pkt	20 Pkt	1 Pkt	56.15 Pcnt	28 Pcnt
1761560324	2 Pkt	20 Pkt	1 Pkt	56.15 Pcnt	31 Pcnt
1761560024	3 Pkt	20 Pkt	2 Pkt	56.15 Pcnt	36 Pcnt
1761559724	2 Pkt	20 Pkt	2 Pkt	56.15 Pcnt	40 Pcnt
1761559424	1 Pkt	20 Pkt	1 Pkt	56.15 Pcnt	44 Pcnt
1761559124	1 Pkt	20 Pkt	1 Pkt	56.15 Pcnt	51 Pcnt
1761558524	7 Pkt	20 Pkt	4 Pkt	56.15 Pcnt	52 Pcnt
1761558224	9 Pkt	20 Pkt	4 Pkt	56.15 Pcnt	51 Pcnt
1761557924	4 Pkt	10 Pkt	3 Pkt	56.15 Pcnt	44 Pcnt
1761557624	3 Pkt	10 Pkt	3 Pkt	56.15 Pcnt	33 Pcnt
1761557324	2 Pkt	10 Pkt	2 Pkt	56.15 Pcnt	36 Pcnt
1761557024	1 Pkt	10 Pkt	1 Pkt	56.15 Pcnt	33 Pcnt
1761556725	2 Pkt	10 Pkt	1 Pkt	56.15 Pcnt	31 Pcnt
1761556424	3 Pkt	10 Pkt	2 Pkt	56.15 Pcnt	34 Pcnt
1761556124	2 Pkt	10 Pkt	2 Pkt	56.15 Pcnt	37 Pcnt
1761555824	1 Pkt	20 Pkt	1 Pkt	56.15 Pcnt	46 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)