KL7BR-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KL7BR-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1761174400	398	294	12	1	1
1761174281	400	294	12	1	1
1761174161	446	296	12	1	1
1761174042	456	299	12	1	1
1761173924	454	302	11	1	1
1761173800	456	301	11	1	1
1761173679	460	299	11	1	1
1761173566	462	299	12	1	1
1761173445	462	298	12	1	1
1761173326	464	298	12	1	1
1761173200	468	296	11	1	1
1761173084	470	296	12	1	1
1761172958	464	298	12	1	1
1761172838	468	296	12	1	1
1761172723	464	298	11	1	1
1761172601	464	297	11	1	1
1761172477	472	295	11	1	1
1761172365	464	298	11	1	1
1761172244	464	298	11	1	1
1761172126	468	297	11	1	1
1761172001	462	301	10	1	1
1761171881	458	302	11	1	1
1761171764	462	297	11	1	1
1761171517	460	300	11	1	1
1761171398	462	297	11	1	1

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)