SP6KBU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6KBU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1762588816	47 Count	0 Count	0 Count	0 VDC	0 VDC
1762587015	46 Count	0 Count	0 Count	0 VDC	0 VDC
1762585214	45 Count	0 Count	0 Count	0 VDC	0 VDC
1762581613	43 Count	0 Count	0 Count	0 VDC	0 VDC
1762579812	42 Count	0 Count	0 Count	0 VDC	0 VDC
1762578011	41 Count	0 Count	0 Count	0 VDC	0 VDC
1762576210	40 Count	0 Count	0 Count	0 VDC	0 VDC
1762574409	39 Count	0 Count	0 Count	0 VDC	0 VDC
1762572608	38 Count	0 Count	0 Count	0 VDC	0 VDC
1762569014	36 Count	0 Count	0 Count	0 VDC	0 VDC
1762560010	31 Count	0 Count	0 Count	0 VDC	0 VDC
1762558209	30 Count	0 Count	0 Count	0 VDC	0 VDC
1762556408	29 Count	0 Count	0 Count	0 VDC	0 VDC
1762554607	28 Count	0 Count	0 Count	0 VDC	0 VDC
1762547981	24 Count	0 Count	0 Count	0 VDC	0 VDC
1762546180	23 Count	0 Count	0 Count	0 VDC	0 VDC
1762544379	22 Count	0 Count	0 Count	0 VDC	0 VDC
1762542579	21 Count	0 Count	0 Count	0 VDC	0 VDC
1762540778	20 Count	0 Count	0 Count	0 VDC	0 VDC
1762538977	19 Count	0 Count	0 Count	0 VDC	0 VDC
1762537201	18 Count	0 Count	0 Count	0 VDC	0 VDC
1762535375	17 Count	0 Count	0 Count	0 VDC	0 VDC
1762533574	16 Count	0 Count	0 Count	0 VDC	0 VDC
1762531795	15 Count	0 Count	0 Count	0 VDC	0 VDC
1762529973	14 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)