F5ZFY-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5ZFY-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784675085	0.04 Rx Erlang	0.02 Tx Erlang	31 count/10m	2 count/10m	17 count/10m
1784673885	0.04 Rx Erlang	0.02 Tx Erlang	38 count/10m	3 count/10m	19 count/10m
1784672685	0.03 Rx Erlang	0.02 Tx Erlang	28 count/10m	2 count/10m	15 count/10m
1784671485	0.04 Rx Erlang	0.02 Tx Erlang	34 count/10m	2 count/10m	15 count/10m
1784670285	0.03 Rx Erlang	0.02 Tx Erlang	29 count/10m	2 count/10m	14 count/10m
1784669085	0.03 Rx Erlang	0.02 Tx Erlang	30 count/10m	3 count/10m	15 count/10m
1784667885	0.03 Rx Erlang	0.02 Tx Erlang	31 count/10m	2 count/10m	18 count/10m
1784666685	0.05 Rx Erlang	0.02 Tx Erlang	39 count/10m	2 count/10m	15 count/10m
1784665485	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	2 count/10m	11 count/10m
1784664285	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	2 count/10m	11 count/10m
1784663085	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	2 count/10m	11 count/10m
1784661885	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	2 count/10m	11 count/10m
1784660685	0.03 Rx Erlang	0.02 Tx Erlang	26 count/10m	3 count/10m	12 count/10m
1784659495	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	3 count/10m	10 count/10m
1784658285	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	3 count/10m	11 count/10m
1784657085	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	3 count/10m	12 count/10m
1784655885	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	3 count/10m	9 count/10m
1784654685	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	3 count/10m	10 count/10m
1784653485	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	3 count/10m	10 count/10m
1784652285	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	3 count/10m	9 count/10m
1784651085	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	3 count/10m	10 count/10m
1784649885	0.02 Rx Erlang	0.01 Tx Erlang	23 count/10m	3 count/10m	9 count/10m
1784648685	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	3 count/10m	10 count/10m
1784647485	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	3 count/10m	11 count/10m
1784646285	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	3 count/10m	10 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)