SQ9IDT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1761516001	219 Count	753 Count	205 Count	4.33 VDC
1761515100	204 Count	707 Count	191 Count	4.33 VDC
1761514199	189 Count	663 Count	177 Count	4.33 VDC
1761513299	174 Count	606 Count	163 Count	4.31 VDC
1761511498	144 Count	493 Count	135 Count	4.33 VDC
1761510597	128 Count	449 Count	120 Count	4.3 VDC
1761509696	114 Count	403 Count	107 Count	4.33 VDC
1761508796	98 Count	335 Count	92 Count	4.3 VDC
1761507895	85 Count	292 Count	80 Count	4.3 VDC
1761506995	69 Count	247 Count	65 Count	4.31 VDC
1761506115	56 Count	202 Count	53 Count	4.3 VDC
1761505209	43 Count	154 Count	41 Count	4.3 VDC
1761504308	29 Count	95 Count	28 Count	4.31 VDC
1761503408	15 Count	42 Count	15 Count	4.31 VDC
1761502507	277 Count	1015 Count	260 Count	4.33 VDC
1761500706	248 Count	846 Count	233 Count	4.3 VDC
1761499805	233 Count	790 Count	219 Count	4.31 VDC
1761498905	216 Count	734 Count	203 Count	4.33 VDC
1761498004	199 Count	685 Count	187 Count	4.31 VDC
1761496202	168 Count	584 Count	158 Count	4.3 VDC
1761494401	140 Count	473 Count	132 Count	4.31 VDC
1761493500	127 Count	429 Count	120 Count	4.31 VDC
1761492599	111 Count	374 Count	105 Count	4.31 VDC
1761491698	93 Count	315 Count	88 Count	4.29 VDC
1761490797	76 Count	260 Count	72 Count	4.34 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)