SP7QPD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7QPD-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Indoor temperature*	Indoor humidity*	Uz12*
1784698425	20.3 [oC]	64 [%]	12.54 [V]
1784697825	20.3 [oC]	64 [%]	12.33 [V]
1784697225	20.3 [oC]	64 [%]	12.54 [V]
1784696624	20.3 [oC]	64 [%]	12.04 [V]
1784696024	20.3 [oC]	64 [%]	12.62 [V]
1784695424	20.3 [oC]	64 [%]	12.51 [V]
1784694824	20.3 [oC]	64 [%]	12.41 [V]
1784694224	20.3 [oC]	64 [%]	12.12 [V]
1784693624	20.3 [oC]	64 [%]	12.01 [V]
1784693024	20.3 [oC]	64 [%]	11.96 [V]
1784692424	20.3 [oC]	64 [%]	12.49 [V]
1784691824	20.3 [oC]	64 [%]	12.2 [V]
1784691224	20.3 [oC]	64 [%]	12.17 [V]
1784690624	20.3 [oC]	64 [%]	12.49 [V]
1784690023	20.5 [oC]	64 [%]	11.96 [V]
1784689423	20.5 [oC]	64 [%]	12.01 [V]
1784688823	20.5 [oC]	64 [%]	12.43 [V]
1784688223	20.5 [oC]	64 [%]	12.09 [V]
1784687623	20.5 [oC]	64 [%]	12.7 [V]
1784687023	20.5 [oC]	64 [%]	12.49 [V]
1784686423	20.5 [oC]	64 [%]	12.43 [V]
1784685823	20.5 [oC]	64 [%]	12.62 [V]
1784685223	20.5 [oC]	64 [%]	12.59 [V]
1784684623	20.5 [oC]	64 [%]	12.59 [V]
1784684023	20.5 [oC]	64 [%]	12.09 [V]

*Used Equation Coefficients:

Indoor temperature: 0, 0.1, 0

Indoor humidity: 0, 1, 0

Uz12: 0, 0.0264, 0

none1: 0, 1, 0

none2: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)