DH1FR-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DH1FR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	Temp.out*
1784691958	1025.5 hPa	8.4 C deg	89 %	0 C deg
1784691894	1025.5 hPa	8.4 C deg	89 %	0 C deg
1784690631	1025.8 hPa	8.5 C deg	89 %	0 C deg
1784690099	1025.8 hPa	8.8 C deg	88 %	0 C deg
1784688253	1026 hPa	8.9 C deg	88 %	0 C deg
1784688170	1026 hPa	8.9 C deg	88 %	0 C deg
1784687596	1025.8 hPa	8.9 C deg	88 %	0 C deg
1784685175	1025.8 hPa	9.4 C deg	86 %	0 C deg
1784684614	1025.9 hPa	9.5 C deg	85 %	0 C deg
1784684584	1025.9 hPa	9.5 C deg	85 %	0 C deg
1784684036	1025.8 hPa	9.5 C deg	85 %	0 C deg
1784683374	1025.8 hPa	9.9 C deg	85 %	0 C deg
1784682773	1026.1 hPa	10 C deg	84 %	0 C deg
1784681590	1026 hPa	10 C deg	84 %	0 C deg
1784680995	1026 hPa	10.2 C deg	83 %	0 C deg
1784679788	1026.3 hPa	10.5 C deg	82 %	0 C deg
1784679169	1026.5 hPa	10.7 C deg	82 %	0 C deg
1784679105	1026.4 hPa	10.7 C deg	82 %	0 C deg
1784677976	1026.3 hPa	10.7 C deg	81 %	0 C deg
1784677288	1026.3 hPa	11.1 C deg	80 %	0 C deg
1784676823	1026.3 hPa	11.1 C deg	80 %	0 C deg
1784676191	1026.3 hPa	11.4 C deg	79 %	0 C deg
1784675576	1026.4 hPa	11.7 C deg	77 %	0 C deg
1784673790	1026.3 hPa	11.9 C deg	78 %	0 C deg
1784673616	1026.4 hPa	11.8 C deg	78 %	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)