DB0ROD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0ROD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX'ed*	DIGI'ed*	Decode*	DecodT*
1753631006	50 Packets	1 Packets	72 %	72 %
1753627402	48 Packets	3 Packets	64 %	72 %
1753623799	39 Packets	2 Packets	53 %	72 %
1753616592	49 Packets	3 Packets	65 %	72 %
1753609385	44 Packets	3 Packets	65 %	72 %
1753605782	48 Packets	4 Packets	60 %	72 %
1753602178	31 Packets	2 Packets	59 %	72 %
1753598575	24 Packets	1 Packets	65 %	72 %
1753594971	28 Packets	1 Packets	52 %	72 %
1753591368	44 Packets	1 Packets	69 %	72 %
1753587765	27 Packets	1 Packets	61 %	72 %
1753584161	30 Packets	1 Packets	58 %	72 %
1753580558	31 Packets	1 Packets	67 %	72 %
1753573351	25 Packets	1 Packets	49 %	72 %
1753569747	20 Packets	1 Packets	50 %	72 %
1753566144	25 Packets	2 Packets	62 %	72 %
1753562559	21 Packets	2 Packets	68 %	72 %
1753558937	23 Packets	2 Packets	71 %	72 %
1753555334	18 Packets	1 Packets	74 %	72 %
1753551730	21 Packets	1 Packets	75 %	72 %
1753548127	28 Packets	3 Packets	77 %	72 %
1753544523	27 Packets	1 Packets	71 %	72 %
1753540920	22 Packets	1 Packets	77 %	72 %
1753537316	18 Packets	1 Packets	74 %	72 %
1753533713	21 Packets	1 Packets	72 %	72 %

*Used Equation Coefficients:

RX'ed: 0, 1, 0

DIGI'ed: 0, 1, 0

Decode: 0, 1, 0

DecodT: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)